Results 1 to 4 of 4

Thread: Newbie AG

Threaded View

  1. #3
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Newbie AG

    Hard experience talking: The BIGGEST thing newbies don't realize is that you need a level surface for the pool. An Intex Donut can tolerate a LITTLE more out of level than most pools, but 2" is pushing your luck and 3" is trouble. Best to be no more than 1" out of level. So if you haven't leveled a site, you will need to....been there, done that, have the tee-shirt!

    If you are lucky and have a VERY level spot it's easier. If not, it's better to dig down than try to build up. Less work, less chance of the weight causing a problem. You have, what? 5,000 gallons? That's about 20 TONS of water!!! Really! So your site is VERY important. (5000/7.48gallons per cubic foot. Each cubic foot weighs either 62 or 65 lbs--I used 62...)

    Added note: It's actually 62.4 lbs/cubic foot. Or simply 8 1/3 lbs per gallon.

    Carl
    Last edited by CarlD; 06-16-2011 at 05:06 PM.
    Carl

Similar Threads

  1. Newbie
    By Katerific in forum General Interest
    Replies: 2
    Last Post: 07-20-2012, 09:07 PM
  2. Newbie
    By sshudson99 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 3
    Last Post: 06-13-2011, 11:58 PM
  3. Hello from newbie
    By Manslick in forum General Interest
    Replies: 5
    Last Post: 06-02-2011, 06:16 PM
  4. Newbie here
    By blondee in forum Using Chlorine and Chlorinating Chemicals
    Replies: 12
    Last Post: 07-11-2006, 02:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts