I have an Aqualogic PS-8 and about 3 years in got a "No Cell Power" error. After much talking with others, it is apparent that the main board is bad. Cost to fix? $500-600. This doesn't include a new salt cell, just the main PCB.

My question to Sean and others is: Since I already have the Aqua logic controller, how would I hook up a Autopilot (or other) system into this? The nice thing about the Aqualogic is that I just plug the cell in. The bad thing is one board controls everything, so if one things goes wrong, teh whole board has to be replaced.

A local pool service guy is recommending switching over to the jandy Aquapure salt system (for $1300 plus install -no thanks), got me thinking of other alternative before i fix my Aqualogic.

All functions other than salt are working fine