Results 1 to 10 of 84

Thread: Time to replace sand?

Threaded View

  1. #34
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Yes. Here are today's results through of 3pm (weather here in Maryland is sunny, mid-80s, low humidity, light breeze)

    8:30a FC 17.5, CC 1.5 - added .3 gal bleach (using Taylor K-2006) - increased FC by 1.5
    11:30a TC between 18 and 25 - added .7 gal bleach (using old kit because I ran out of titrating reagent) - increased FC by 3.5
    1:30p TC 25ish - nothing added
    3:00p TC between 18 and 25 - added .7 gal bleach to be on the safe side - increased FC by 3.5

    I will test TC again in an hour or so. My bleach is 12.5% so each gal should be upping the ppm by 4.8.
    Last edited by jonno; 06-26-2011 at 04:26 PM.
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

Similar Threads

  1. Time to replace the cell?
    By semenzato in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 07-24-2011, 03:26 AM
  2. How often shoud I replace sand in sand filter?
    By mikef in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-18-2011, 11:41 PM
  3. Time to replace the QuikChlor...
    By steveinaz in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 06-20-2011, 11:44 AM
  4. Time to replace my liner?
    By mdenegre in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 11-14-2010, 10:39 AM
  5. Time to replace the Dolphin Dynamic
    By beantown in forum Pool Cleaning: Manual or Automatic
    Replies: 10
    Last Post: 09-09-2010, 09:28 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts