Pool is full and test results as follows:
FC: 3.5
CC: 1.0
PH: 7.2
TA: 30
CH: 20
CYA: 0

According to my read on the Pool Calc, I need:
23 oz of 6% bleach
10 oz of borax
70 oz of baking soda
40 oz of stabilizer

I've read that CH doesn't matter for a vinyl liner but Saturation index is -1.84 (suggest adding 264 oz of calcium chloride) ... if I do not adjust this do I need to adjust other goal values to compensate and get SI correct?

After this is balanced, I will add the salt and when dissolved I will turn on SWCG and learn what settings work to keep FC in range.

Thanks all for the help!
Mark