Added granualar as per directions through skimmer. De filter no backwash.
Added granualar as per directions through skimmer. De filter no backwash.
Huh. Then it's just sitting in there, not doing anything? I don't know a thing about DE filters, so someone else will have to give it a shot.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Re: how much bleach to add.
I add 1 c liquid chlorine (about 10%) every other day. If I were using Clorox I'd probably be adding 1 c each day. My pool is 12,500 gal.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
how much bleach to add is highly variable, depending on, well, everything!
more swimmer load=more chlorine
more aeration=more chlorine
more debris in pool= more chlorine
more wind/sun= more chlorine
more CYA = less chlorine (fooled you, didn't I!!!)
I use about 1.5 gallons in 3 days- full sun, temp 90, breezy, low swimmer load during week (wife a little during the day, me in the evenings with cold beer after work)... CYA 30-40 range... 26k gal pool, sand filter (filter shouldn't affect chlorine use, other than how much it is on stirring up water and causing more aeration...)
Bookmarks