No argument there. It was just that the OP posted the following specs for the current filter which is why I suggested a new filter if he goes with a SuperPump. It will well exceed the flow rate requirements of the filter and not a good match.

The label on the pump motor says Sta-rite JWPA5FL-2A2, 1.5HP 115V VD 3FT20A
It really just mentions power usage, not flow.
The label on the tank says model PLM100
Max work pressure: 50PSI
FIlter area: 100 sq ft
Max flow rate: 37GPM
However, I believe that most if not all pump/filter combo units are for AG pools and I think would end up with the same problem.