Re: Pool still cloudy white. Been a week today... This stinks.
OK.
I added 244 oz of bleach late afternoon yesterdayto raise FC 17-20. FC was a 2 or 3.
Buy night time I tested with a 1/4 part pool water to 3/4 part ro tap water it tested at FC 8. ( 2 ppm x 4 )
So I added 96 oz to bring it back up to FC 15 ppm
This morning tested same way and was a FC 12.
Added 48 oz to bring back to FC 15 PPM
Filter was running all night. Pressure rise stopped on both filters. Sand with DE started at 12 psi.Added DE and went to 14 psi. Overnight it raised to 16.5 and stopped there. It was pretty much there when I went to bed.
Cart I am not touching. Its new and I have not cleaned it. I want it to get dirty so the pressure will start rising, and it catches stuff.
Pool still cloudy.
So FC 15
PH is reading high now again, 8.2ppm. Because of shocking someone told me, and is normal????
Alk 80 ppm
CYA . Trying to find more reagent. Everone is out of it.
Total hardness. 17.1 ppm
12x18 vinyl AG 6.2K gal; Hayward equp: 16" sand filter (spring clean up) -- Xtream 100 sft cart (after clean up) -- Power Flo Matrix 1hp 2spd pump w/ AO Smith motor
Bookmarks