+ Reply to Thread
Results 1 to 10 of 26

Thread: Just Set Up Pool...Need some pointers

Hybrid View

  1. #1
    madwil is offline Registered+ Widget Weaver madwil 0
    Join Date
    Apr 2011
    Location
    virginia
    Posts
    261

    Default Re: Is my water safe to swim in?

    pH at 7.2 is not to low- 7.2 to 7.8 is the good range (so 7.2 is the low end, but not excessive)
    The tabs will gradually add Cl and CYA as they dissolve, continue to monitor FC and add bleach to maintain your Cl levels
    Your pH should rise over time, but watch it- the trichlor (the pucks are trichlor) can cause it to go down- so you may need to use some borax initially to boost it/keep it above 7.2.
    Once the CYA is in, you should quit using the tabs and the pH will start to rise...
    you can add the baking soda if nothing else, but it doesn't add as much pH as borax and will also increase TA more...
    not sure about the skin burning- may be just the dry skin getting acclimated, but may be something in water- the chlorine will kill it if its something in the water

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Is my water safe to swim in?

    You can raise pH by aeration and that will NOT raise t/a.
    Aeration can be done by a fountain, by splashing 12 year olds, by pointing the return(s) as the surface so the water ripples or bubbles.

    Your chlorine is 0. This is never good. Add bleach or some form of chlorine immediately, up to shock level. I'd add a full gallon of bleach right now. That should get your FC up to the 10-12 range which is the shocking level for 0 CYA.

    Carl
    Carl

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts