+ Reply to Thread
Results 1 to 10 of 40

Thread: Steps - Switching from Baquacil to Chlorine

Hybrid View

  1. #1
    Join Date
    May 2011
    Location
    Middle TN
    Posts
    24

    Default Re: Steps - Switching from Baquacil to Chlorine

    To everyone,
    The following may be easier to read - sorry for the repeat!

    Reading 6:00 8:10 10:10 12:15 2:15 4:30 6:45 8:30 p.m. 3/31 6:00 a.m.
    Water Temp 70 75 76 77 78 78 79 78 76
    CF (ppm) 5.0 14.5 6.0 9.0 7.5 10.0 11.0 11.0 13.0
    CC (ppm) 1.5 1.3 1.0 1.0 1.0 0.75 0.75 0.75 0.75
    pH 7.2 7.8 7.3 7.3 7.3 7.3 7.4+ 7.4 7.4+
    Chlor. Added 7.1 - 4.3 4.3 2.9 2.9 - - -
    (bleach 6%, in gallons)


    Gene

    before shocking


    before shocking


    just after shocking


    day 2


    day 3
    Last edited by PoolDoc; 07-13-2011 at 08:30 AM. Reason: add photos

  2. #2
    madwil is offline Registered+ Widget Weaver madwil 0
    Join Date
    Apr 2011
    Location
    virginia
    Posts
    261

    Default Re: Steps - Switching from Baquacil to Chlorine

    it looks like your FC held overnight, but with reading increasing concerned with if you added something after the 830pm reading?
    if not, your FC should not have increased, but at 6am I can't count drops (I get up at 5, can talk, but no testing until after 1st POT of coffee!)
    your CC is slowly going down, which is typical- keep the shock level of FC another day or two, until you lose <1ppm FC overnight, and CC is <.5
    Then change out sand and you have successfully gotten rid of BaquaGoo!

  3. #3
    Join Date
    May 2011
    Location
    Middle TN
    Posts
    24

    Default Re: Steps - Switching from Baquacil to Chlorine

    Madwil,
    Actually, I did not add any more chlorine (bleach 6%) after the 4:30 p.m. reading – my guess is two fold, 1) the overall total chlorine added for Monday was ~ 19 gal., and 2nd ) with the periodic brushing of the sides & bottom (filter passage, sock in skimmer basket, etc.) – it took an extra amount of time for the FC to rise! Beyond that thought I’m kind of struck as to why as to why it increased overnight?
    Your recommendation to continue for another day (or 2) is in line with my thinking – although today I have not been as punctual as I was yesterday – a holiday! I’ll be very happy to finally get ride of the BaquaGoo!

    Gene

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  5. #5
    Join Date
    May 2011
    Location
    Middle TN
    Posts
    24

    Default Re: Steps - Switching from Baquacil to Chlorine

    Wednesday, June 1st 6 a.m. - Day 7

    Our pool continues to become clearer (by looks anyway), with still some debris laying on the bottom. Yesterday’s results were basically a repeat of Monday, except with testing spread out to every 3-4 hrs with a total of 14.34 gallons of chlorine (bleach 6%) added. Again the FC level did vary a little more during noon / afternoon hours and the CC level stayed basically the same (0.75 – 0.5 ppm). Overnight the FC level did drop by 1 ppm (maybe due to testing?) and the CC level remained unchanged (0.75 ppm) – which prompted a question as to why no change since Monday’s p.m. test? I contacted Taylor and asked them if there was a procedure to test the CC level independent of FC, using a 25 ml water sample (0.2ppm resolution)? The answer I received back was “Taylor does not currently offer a method for testing combined chlorine independent of the free chlorine result. To my knowledge, I am not familiar with another company that does.” - which seems a bit odd to me? Does anyone on the forum have any comments or concerns about their reply?

    With all of the repeated testing, I need to immediately re-order the reagents for the chlorine testing! So plans are to do the dosages of chlorine (bleach 6%) - based on my records from the past 2 days, and only test 2-3 times / day, especially for 8 p.m. today & 6 a.m. tomorrow.

    Watermom!
    I do agree with your recommendation, another day to see if the CC will ever go to lower? Thank you for your response & have a great June 1st!

    Gene

  6. #6
    madwil is offline Registered+ Widget Weaver madwil 0
    Join Date
    Apr 2011
    Location
    virginia
    Posts
    261

    Default Re: Steps - Switching from Baquacil to Chlorine

    I think, with regards to testing CC, the issue is FC causes errors in CC reading; so you have to remove the FC first, without overdoing it, before you can test CC.
    I think, at your current readings, you're safe to change out sand whenever you want- but maintain shock levels of FC until your CC is <.5.

  7. #7
    Join Date
    May 2011
    Location
    Middle TN
    Posts
    24

    Default Re: Steps - Switching from Baquacil to Chlorine

    Madwil,
    Thank you for your comments - they are always helpful!
    When you say, “remove FC first” I assume you mean by adding the R0781 drops until the water sample is colorless, which is what I have been doing. However, if there is a short time delay (making notes, etc.) until the 5 drops of R-0003 are added – the water sample will usually take-on a pinkish color? So…would you just add the R-0003 or go back and add some additional drops of R-0781? Would you happen to know of a better method of testing the CC at the lower end?
    Gene

+ Reply to Thread

Similar Threads

  1. Switching from SWCG to liquid Chlorine.
    By poolaris in forum Using Chlorine and Chlorinating Chemicals
    Replies: 13
    Last Post: 05-31-2013, 04:24 AM
  2. Switching to Chlorine from Bromine in Hot Tub
    By petermoran in forum General Interest
    Replies: 2
    Last Post: 06-05-2012, 08:41 PM
  3. Re-balancing after switching to Chlorine
    By GeneNTN in forum Testing and Adjusting Pool Water Chemistry
    Replies: 10
    Last Post: 06-06-2011, 02:48 PM
  4. Livestrg05 - Newbie question about switching types of chlorine in green pool
    By Livestrg05 in forum Dealing with Algae & Slime
    Replies: 4
    Last Post: 04-21-2011, 05:55 PM
  5. Switching from Chlorine to Salt
    By kmmlangston in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 22
    Last Post: 08-05-2010, 09:59 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts