+ Reply to Thread
Results 1 to 10 of 14

Thread: fill water test results

Hybrid View

  1. 05-22-2011 08:39 AM #1
    CarlD's Avatar
    CarlD
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: fill water test results

    I would check the stabilizer level, just to be sure it isn't too high. Let us know the number.

    Carl
    Carl
    Reply With Quote Reply With Quote
  2. 05-22-2011 11:17 AM #2
    Wayne
    Wayne is offline Established User Wayne 0
    Join Date
    Apr 2011
    Posts
    8

    Default Re: fill water test results

    CYA looks to be slighty less than 30. Black dot doesn't disappear at 30 but it does when tube is full, which is just a little more.

    Wayne
    Reply With Quote Reply With Quote
+ Reply to Thread
« Easy Set Intex Pool | high PH »

Similar Threads

  1. Testing fill water - strange results
    By tado921 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 0
    Last Post: 06-11-2013, 09:57 AM
  2. Fill with only 1 foot of water and don't fill for 24-48 hours?
    By Jacob99 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 04-26-2012, 06:00 PM
  3. First water test results
    By Daggit in forum DPD-FAS based testing
    Replies: 2
    Last Post: 11-02-2006, 01:49 PM
  4. my fill water test
    By gordyjamz in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 07-23-2006, 01:09 PM
  5. New Pool Set up...Inital fill test results
    By weluvstuff2 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-18-2006, 10:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules