12'x20'x4' inground pool vinyl liner replacement

[kathylu]

Thank you for replying Watermom and Waste...I need all the help I can get! Any suggestions for a reliable liner company online? Our local pool supply store quoted over $900 for this liner and that seems very high, considering the replacements for a Kayak and Fantasea pool in the same dimensions average about $300. Need to get the ball rolling on this replacement...the walls are getting rustier every day. Thanks for any help! Kath

[waste]

I got a number of online dealers when I Yahoo searched "swimming pool vinyl liners". I can't speak about the reliability because I've never bought a liner online.

I think it was Al (Poconos) who brought up the mil v.s. gauge scam some run - 25 gauge is a good bit thinner than 25 mil so - caveat emptor (buyer beware)! [I HOPE I spelled that correctly]

[Jim_G]

Kathylu I have used PCPOOLS dot com for many items including a liner just like the one you need...mine also was DIY built to the same spec's...i got a season closout deal for the liner and shipping @ $214.00. and it fits like a glove..ck them out. if your pnls are rusting but still usable you can clean them off with a 3m scotch bright pad then prim with some spray can paint. i used 3m spray adheasive and 1/8" floor foam padding (the foam that goes under hardwood floors) glued to the walls which help protect the vinyl from abrasions..

[kathylu]

Waste...Jim..Watermom..You guys (and gal) are awesome! Thanks you so much for the advice...will definitely be using the foam liner and hoping I get a reliable liner company. I really appreciate you taking the time try to help me. As I said in my first post...I'm not even the pool owner. However, I have truly joyful memories of this pool and now the responsibility is in my world. I'll tell you how it goes!(all suggestions are still welcome...if anyone has found a major liner deal or awesome DIY tip!) Tnx again Kath