Thanks Carl & Watermom for the guidance. Hopefully you can hang with me for a few days to help me thru. My updated conditions as of 8:30 pm. This is after adding 14 gals of bleech over the last 24 hrs. The last 4 gals of bleech was at about noon today. (we had a cool, very over cast, cloudy day here in central NJ)
FC - .8
pH - 7.1
ALK - 130
CC - 3.2
CYA - did not test

Pump is on 24/7, backwashing 4 times a day (or as pressure rises). The water is basically clear, however it is has lots of suspended green silt floating thru it from the walls and bottom being brushed early today (so much so you can not see the botom in deep end). If I'm reading my chart correct, it is telling me to add about 3 lbs of baking soda to get my pH up a little.

Questions:
1. Do I add more bleech
2. Does it sound right; the 3lbs of baking soda?
3. Will continue with filter/backwash
4. Should I be doing anything else

Thanks, you folks are great.