Adding 2.8gals of 6% bleach would raise FC by 6-7ppm in a 26k Gal pool, depnding on how strong the 6% bleach actually was (can be as high as 8%).
Typically, 1 gal of 6% Bleach will raise FC by 6ppm in a 10k gal pool.
Adding 2.8gals of 6% bleach would raise FC by 6-7ppm in a 26k Gal pool, depnding on how strong the 6% bleach actually was (can be as high as 8%).
Typically, 1 gal of 6% Bleach will raise FC by 6ppm in a 10k gal pool.
Moderator at another pool maintenace forum
24' Round AGP, SWG, 0.5hp pump, 250lb sand filter,
pool still covered, but actually tested all parameters today.
Since the previous post, I added 4 cups MA, over 3 days.
FC 10
CC 0
TA 40
CH 150
CYA 40-50
pH 7.4
my guess now is that there was still some Cl in the pool, and the additional just pushed it higher- teach me to assume!
The pH I guess was the result of circulating the water over several days...
Since the Cl is holding up, and no CC, I think I'm in good shape for removing the cover and starting the season!
Probably taking off cover this weekend, and then retest in a few days- hoping my temp holds, is at 68F now!
Bookmarks