So we closed on the house Friday and painted the inside over the weekend. I am now starting on the pool! Started cleaning it tonight, but ran into a snag. I was taking the leaves and twigs out with the leaf rake and noticed that the water was not draining from the rake and making it extremely heavy. I then noticed the problem, we have a cottonwood tree in the back yard which has deposited a ton of cotton on the bottom of the pool. About an hour or so into my cleaning my pole bent and snapped. Anyone have any suggestions for this? Can I get a stronger pole? Do I have to just watch how much I am picking up?

Also, on a separate note, I started looking at my pipes, filter, and pump. I noticed that one of the pipes was cut through, this one goes under the concrete. I am assuming it goes to the skimmer or the drain. I will upload some pictures tomorrow and see if you guys can help me figure out what all these pipes are for and what I am missing.

Thanks for all the help.