+ Reply to Thread
Results 1 to 6 of 6

Thread: Question about Soaking filter cartridges

Hybrid View

  1. #1
    salinda is offline Lifetime Member Weir Watcher salinda 0
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    130

    Default Re: Question about Soaking filter cartridges

    Anyone have input on this? Simple question that I can't get my head around. What do you do with the dirty soak solution in a large trash barrel? How/where do you dump it?
    Salinda
    owner of ~35,000 gallon plaster IG pool/spa combo. Ikeric Dyna-Miser VS150 filter pump, 2 hp whisperflo spa jet pump, The Pool Cleaner 2x suction cleaner, Clean & Clear Plus 520 cartridge filter, Zodiac Clearwater LM2-40 SWG, Sta-rite 400k heater, solar heat pads and coils.

  2. #2
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Question about Soaking filter cartridges

    I have only cleaned my twice but each time I did soak them in simple green and water. Pool was new and a lot of plaster dust in the filter.

    A good indicator would be that the pressure does not drop all the way after cleaning. At that point a soak may be necessary. Also, if your family uses a lot of sun screen, I would suggest a soak each cleaning.

    I am planning on only cleaning mine twice a year so it is not much extra work to soak them overnight between filter cycles.

    I dump the water near the pad where I have just dirt and bark and a low spot where it collects and then is absorbed into the dirt. I know of others who clean their filters on their lawn and dump the water there.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  3. #3
    salinda is offline Lifetime Member Weir Watcher salinda 0
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    130

    Default Re: Question about Soaking filter cartridges

    Thanks Mark! I also just read at my sanitation district website that my husband shouldn't be cleaning the filters on the driveway to let the waste run into the storm drain....it should be done on the lawn or dirt.

    I just wasn't sure about dumping detergent into the ground, but it is probably mostly fertilizer if anything.....
    Salinda
    owner of ~35,000 gallon plaster IG pool/spa combo. Ikeric Dyna-Miser VS150 filter pump, 2 hp whisperflo spa jet pump, The Pool Cleaner 2x suction cleaner, Clean & Clear Plus 520 cartridge filter, Zodiac Clearwater LM2-40 SWG, Sta-rite 400k heater, solar heat pads and coils.

+ Reply to Thread

Similar Threads

  1. Failing c400 filter cartridges
    By gdubs in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-09-2012, 10:32 PM
  2. What the best De Filter for lots of sand, Grid or Cartridges?
    By intrepid in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 03-11-2012, 03:44 PM
  3. Soaking the Cartridge filter
    By PaulE10 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 10-30-2010, 09:51 AM
  4. When to Change Cartridges
    By jhm in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 06-06-2008, 05:24 PM
  5. Question about filter soaking...
    By Henrys514 in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 06-07-2006, 07:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts