+ Reply to Thread
Results 1 to 3 of 3

Thread: Has anyone heard of a Siverado Pool?

  1. #1
    Join Date
    Apr 2011
    Posts
    5

    Default Has anyone heard of a Siverado Pool?

    I just acquired a used 4 year old Siverado Desert 18x33 AGP that is very good condition but would like to replace a few parts while it is disassembled. Specifically the previous owners had screw decking onto a few of the top rails, I would like to replace these since they have screw holes in them. Also, two of the verticals were below ground and stained. I may as well do these too since the rest of the pool still looks pretty new. Thansk for any info you all may provide.

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Has anyone heard of a Siverado Pool?

    Hello and welcome to the forum. Have you looked around online for the needed replacement parts? It may be that you get very few replies to such a specific question here on the forum. Maybe I'm wrong and there will be somebody familiar with this model, but my thinking on this is that you may just be better off doing a google search to see if you can find something. Good luck and again, welcome!

    By the way --- you didn't mention this, but you can usually expect to replace the liner, too. Once a liner pool is drained, you can't usually reuse the liner. Just FYI.

  3. #3
    Join Date
    Apr 2011
    Posts
    5

    Default Re: Has anyone heard of a Siverado Pool?

    I have done all the usual Google searches. Tried a few of the others too. I am new to the whole pool thing but if this industry is like many others, there are probably few real manufactureres and all the products are private labeled. Perhaps I am wrong. I do expect to replace the liner. Looks like the best deal i can find online is linerworld.com. I will most likely go that route. I am also thinking of adding the pad and foam cove moldings.

+ Reply to Thread

Similar Threads

  1. Anybody heard of Aquachlor???
    By cmack in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 01-28-2007, 04:00 AM
  2. Anybody heard of/done business with...
    By jcmjrt in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 08-07-2006, 12:28 AM
  3. What is the worst "pool store" info you have heard?
    By jenpen400 in forum General Interest
    Replies: 29
    Last Post: 07-19-2006, 09:12 PM
  4. anyone heard of Cambria pool?
    By jimmyzshack in forum Above-Ground Pool Construction & Repair
    Replies: 0
    Last Post: 06-06-2006, 08:46 AM
  5. Anyone heard of The PoolCleaner?
    By salinda in forum Pool Cleaning: Manual or Automatic
    Replies: 2
    Last Post: 05-24-2006, 11:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts