Hi Guys, I'm a new subscriber to the forum. We bought a new house and the pool hasn't been maintained for some time. I started trying to turn the pond (lots and lots of algae) back into a pool about 8 days ago. After shocking the heck out of the pool yesterday, I woke up to a blue pool again (with lots of piles of yellowish brown dead algae . The problem is that it's still cloudy. I added some floc on Friday evening and did a vacuuming and brushing Sunday. I'm not able to properly vacuum the deep end because I can't see the bottom very well.

Pool Info:
32,000 gallon
Vinyl Liner
Sand Filter (I'm wondering if this is doing it's job properly)
Using Calcium Hypochlorite to shock
I've been testing about every day or so at the pool store (pinpoint) computer tester but I purchased a taylor kit from Leslie's pool (their re-branded k2006). I ran several tests tonight and these are my numbers:

FC: 15 (using the dilution method)
TC: 15
CC: 0
pH: 7.2
TA: 150 (the pool store had me add to much baking soda but said it's not a problem)
CYA: 9 (wouldn't measure on the dropper test but that was the pinpoint reading from Fri)

Not sure what to do from here... any advice would be appreciated.