Re: Pentir Intellichlor Switch?
Pentair uses a flow switch instead of a pressure switch. The flow switch should activate around 15 - 20 gpm. Increased pressure should not affect the flow switch other than maybe negatively...opposite from what you're describing.
Check and make sure the flow switch is positioned correctly to the flow. That is, check the inlet side of the cell and ensure that the flow paddle is positioned so that the flow pushes it towards the center post on the flow switch.
Its possible that the flow switch is bad too.
Sean Assam
Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com
Bookmarks