Results 1 to 10 of 15

Thread: Pool Opening - PS234 Test

Threaded View

  1. #12
    Join Date
    Dec 1969
    Location
    Maine, USA
    Posts
    60

    Default Re: Pool Opening - PS234 Test

    PH - 7.6
    Alk - 90

    FC - 8.5
    CC - 0
    TC - 8.5

    Took cover off:



    10 minutes later with initial 'shock':



    Day 2:



    End of Day 2:



    10 minutes ago (day 3 - AM) after vacuum/brush



    This is the final:



    Even a drastic difference from the last one above. All of my numbers are perfect (MO) and I'm using up some pucks from last season to start getting my CYA up. Other than that, it was bleach (@7 gal.) and 1 box of borax for my opening 'stuff'. A far cry from past years 'kits' from the local pool store ... done with that


    Thanks everyone! Couldn't have done that without this forum or the PS234!
    Last edited by PoolDoc; 05-26-2018 at 01:12 PM.
    Regards,

    Ron [ muvipix.com ]

Similar Threads

  1. opening pool - water test results
    By mike_311 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 22
    Last Post: 05-25-2013, 09:55 PM
  2. Opening the pool a little early. Here are my test results so far.
    By bri3180 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 0
    Last Post: 02-19-2013, 12:24 PM
  3. Opening pool test results
    By GregP in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-18-2012, 10:37 PM
  4. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 12:04 AM
  5. first pool, first test with the ps234
    By dhale63 in forum DPD-FAS based testing
    Replies: 1
    Last Post: 05-08-2006, 10:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts