Yes,I will post chemistry this weekend when I can get my pool store to run all of them (incl. the conditioner, which I believe is best left to the store's test device)

BTW my controller allows the salt setting to go all the way down to 1%, which is where I have it now. I have periodically checked to see that the salt system is cycling off (as is should pretty much 99% of the time the pump is running since I have the salt generator set to run only 1% of the time).

Perhaps it is just the colder water temp. I live in San Diego. Warm in the winter on a relative scale, but we are going through some cold nights (33 degrees - that's cold for us). So water temp is hovering around 40 degrees, which probably is the high chlorine problem.

I would think that levels would start to improve as I have been running the pump with no salt generator for almost a week now. Oh well - will take a reading this weekend and post results.