-
Re: wsubora's pool
Today my readings were:
FC: 27 PPM
CC: 0 PPM (My CC reading last time was erroneous, I did the test wrong).
PH: 7.4
TA: 150
CYA: ~20
Still getting the hang of the Taylor 2600.
Vacuumed the pool again this morning
Pool is still very cloudy, hoping it clears soon so I can close it.
I was using 6% chlorine bleach, as suggested in the prvious forum.
Thanks again for all the help.
-
Re: wsubora's pool
You're on the right track, just let the chlorine drift back down to the 10-15 range and keep it there until the pool is cleared. Brush daily, keep the filter running 24/7 and clean it as your pressure indicates. Hang in there!!
Janet
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks