Pentair SAM light failure - replacement needed

[Pool Clown]

If you are using a SAM light now, the old style American Products fixture (now Pentair) will work just fine in that niche. Out of the box, it will have an incandescent bulb that you will have to open and replace with the LED light of your choice. You will also need to specify your length of cord as the fixture and the cord are sold as one piece.

Or were you looking for an LED fixture?

Sorry if i sent you in the wrong direction...

[gmarch]

If you are using a SAM light now, the old style American Products fixture (now Pentair) will work just fine in that niche. Out of the box, it will have an incandescent bulb that you will have to open and replace with the LED light of your choice. You will also need to specify your length of cord as the fixture and the cord are sold as one piece.

Or were you looking for an LED fixture?

Sorry if i sent you in the wrong direction...

No worries... I was looking to replace the entire SAM light with a "modern" LED light, but I wanted to know if it will fit in the niche that is there for the SAM light without any modifications. Or will I have to remove and replace the niche?

And, also... I'm looking for some instructions on 1) how to run the wires, and 2) reseal up the niche when I'm done. I'm handy, but I've never done any work on a pool before.

Thanks...

/greg

[Pool Clown]

If you want, post a link of a light that you want to use, and we can tell you if it will fit in your niche.