Newbie - Stain removal via ascorbic acid

[herb396]

Thank you Janet

[herb396]

OK,,so Monday night I put in the Metal Free and dropped in a one of the new tabs into the skimmer,,pump is still running 24/7 and were brushing ,,alot.

Water is still cloudy white so it's hard to tell for sure,,but the stain does seem to be fadding.

Were backwashing once a day. Again hard to see for sure what's coming out with the water being so cloudy. (odd note here is that my pressure never seems to go up on the filter?)

Current readings as on noon yesterday:
Tot Chlorine = 0
Free Chlorine = 0
Ph = 7.2
Alkalinity = 130

I added another tap to the skimmer due to the flat 0 on the CL

[aylad]

Your pump pressure probably won't go up if you're backwashing daily--it never gets enough "stuff" in it to cause a rise.

Janet

[herb396]

Current readings /conditions as of 10:00 am today:

Tot Chlorine = .7
Free Chlorine = 0
PH = 7.4
Total Alkalinity = 190
Adjusted Alkalinity = 164

Water is still very cloudy/white (can not see bottom) even at shallow end.

Guees I'll add more muriatic acid to lower the pH

[PoolDoc]

Just to echo what Janet said -- don't backwash daily. That does NOT help things, when you have a sand filter. The way they work, the dirt become part of the filter, and big dirt pieces end up helping to filter little dirt pieces. But, if you backwash daily, that can never happen.

So, wait till you see a pressure rise before you backwash.

I'm not sure adding the muriatic acid had anything to do with the cloudiness. You've had really low chlorine . . . and I'm guessing the pool is still in use. If so, continued use with low chlorine will cause a build up of something that will cause a pool to go cloudy or even almost milky. If your pool has been used a lot, the cause may be the people goo, and not have anything to do with muriatic acid.

You need to keep your chlorine low BUT you need to add it often enough so that you ALWAYS have at least a little chlorine present. ALWAYS, ALWAYS, ALYWAYS . . . or else you've gotta stop using it.

And . . . you need to go back to lowering the pH.

Ben

[herb396]

Ben,
Understood,,I should be able to hold the CL now that I have the right pucks. Just finished adding a qt. of muriatic acid to lower pH..I will test again around 6:00 pm....thanks for the continued guidance.

[herb396]

Wednesday Night:

CL = 1
pH = 7.0

Water is still cloudy/milky,,little less than before. Can see thru to shallow end bottom, but not clearly. I'm still brushing, alot.