I am attempting to hook mine up after the Pool Pilot.

On page 6 of the manual it shows wiring an external timer with load out of the Pool Pilot coming off termianal positions 1 and 2.

For a 2 speed pump the load out becomes terminal strips 5 and 6 with the low speed coming off the relay.

It would seem logical to me that when running a two speed pump that the timer would be feeding off of terminal strips 5 and 6 in this situation as opposed to 1 and 2 as described in the top "external timer" diagram.

Correct?

It would also seem like this would leave the low speed of the pump continually hooked up since it would be a homerun wire from the Pilot to the Pump motor. Basically wouldn't this mean the Pool Pilot could, if programed to do so turn the motor on low speed regardless of the timer?