+ Reply to Thread
Results 1 to 6 of 6

Thread: New homeowner, pool owner lots of q's!

Hybrid View

  1. #1
    Join Date
    Jul 2010
    Location
    Atlanta, GA
    Posts
    6

    Default Re: New homeowner, pool owner lots of q's!

    Thanks....I was just reading some of your posts on trichlor and CYA (and I just bought a bucket of trichlor, doh!). Since I have the bucket of trichlor already, could I use use it profusely until it's gone, and then switch to liquid chlorine? Any harm in high CYA levels, other than eating chlorine? I'd hate to throw away 60+ pounds of trichlor. But good advice on the liquid chlorine. I assume it's not stabilized though, so wouldn't I have to add CYA at some point to prevent the UV from burning off the chlorine? Or is there a preferable stabilizer to add?

    Maybe a stupid question, but do SWGs generate CYA?

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New homeowner, pool owner lots of q's!

    You can use the trichlor, but it will continue to make your cya get higher and higher and higher. Who knows how high your cya is?? A reading of 100 (since the tester cannot differentiate any higher) could really be 200? 300? ????? You can use the pucks but it is going to be hard to manage your pool. You will have to run extremely high chlorine to compensate for the high cya. Take a look at this chart:

    Stabilizer . . . . . . Min. FC . . . . Max FC . . . 'Shock' FC
    => 0 ppm . . . . . . . 1 ppm . . . . . 3 ppm . . . . 10 ppm
    => 10 - 20 ppm . . . . 2 ppm . . . . . 5 ppm . . . . 12 ppm
    => 30 - 50 ppm . . . . 3 ppm . . . . . 6 ppm . . . . 15 ppm
    => 60 - 90 ppm . . . . 5 ppm . . . . . 10 ppm . . .. 20 ppm
    => 100 - 200 ppm . . . 8 ppm . . . . . 15 ppm . . .. 25 ppm

    Trichlor pucks will not go bad as long as you keep them dry. You can put them away for the summer and save them to use next year if your cya level is low enough to permit it. Your call. I would not suggest continuing to use them but if you decide to, just be aware that your cl levels will need to be really high all the time and you may have a lot of trouble keeping this pool algae-free.

    Liquid chlorine is not stabilized. You have so much cya in there already that you would not need to add more. (It does not go away. The only way to get rid of it is to drain and refill.) SWGs do not generate cya.

    Hope this helps.

+ Reply to Thread

Similar Threads

  1. New Homeowner, a few questions
    By videotonyk in forum Using Chlorine and Chlorinating Chemicals
    Replies: 2
    Last Post: 05-27-2013, 05:22 PM
  2. New Member, New Pool, Lots of questions
    By riverwhiskey in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 08-22-2012, 07:56 AM
  3. Pool is brown...tried lots of things...lots of problems!
    By ravencr in forum Commercial Pool Users, Managers & Workers
    Replies: 8
    Last Post: 06-24-2011, 12:37 PM
  4. Replies: 1
    Last Post: 06-04-2011, 06:55 PM
  5. pool startup lots of iron
    By woman.n.a.shoe in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 1
    Last Post: 06-01-2008, 02:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts