+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: It's BAAACK!!!

  1. #11
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: It's BAAACK!!!

    The pH may be reading falsely high because your chlorine level is high, so I wouldn't adjust it until you get the chlorine down closer to normal levels. Let the chlorine drift down to 20 ppm, and leave it there until the pool clears, you're not losing any chlorine overnight, and your CC stays at 0. How's the water looking?

    Janet

  2. #12
    Sue225 is offline Subscriber Thread Analyst Sue225 0
    Join Date
    Jun 2010
    Location
    NW Indiana
    Posts
    59

    Default Re: It's BAAACK!!!

    water looks great! much clearer, that murky color is gone! pool was holding at 20 tonight! i have a question, when i check for cc it is colorless but, today i got side tracked for a few minutes and when i looked at the test cell it was slightly pink added 1 drop went clear, waited a few more minites and it was slightly pink again added another drop was clear. I did this about 5 times then i just quit. is this normal? do i have cc? Shoud you always let it sit or not? Thanks in advance.

  3. #13
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: It's BAAACK!!!

    If you let it sit, it will always start to tinge pink--ignore it. If you didn't have any pink when you added the 5 drops, then you don't have any CC.

    If the water is holding chlorine overnight, it's clear, and you have no CC, then you can let it start drifting back down to normal--but never less than 5 ppm!! Once it gets below 10 ppm, go ahead and recheck your pH. If it's still high, then you can adjust it at that point.

    Janet

  4. #14
    Sue225 is offline Subscriber Thread Analyst Sue225 0
    Join Date
    Jun 2010
    Location
    NW Indiana
    Posts
    59

    Default Re: It's BAAACK!!!

    fc was 10 this evening, cc was 0 and ph 7.5. Added 2 qts of 6%. Can't get out there to check chlorine levels because it is storming. I did add 24 oz of poly... because we are having company and temps will be in 90's. Wanted to make sure the algae was gone!!
    We are still vacuuming to waste. Much less brown areas on bottom of pool. Seems like to chlorine dropped quite a bit after I added poly..algecide. Is this normal?

    Thanks

  5. #15
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  6. #16
    Join Date
    Aug 2010
    Location
    Connecticut
    Posts
    7

    Talking Re: It's BAAACK!!!

    My wife & I agree, we have Chlorine Envy!!! WE cannot even get the darn chlorine to register, let alone hit 100!!!!!

  7. #17
    Sue225 is offline Subscriber Thread Analyst Sue225 0
    Join Date
    Jun 2010
    Location
    NW Indiana
    Posts
    59

    Default Re: It's BAAACK!!!

    That is what brought me to this forum in the first place. Read my story in the thread called Using Chlorine Products, etc. Go to "Cyanuric Acid." That is the story of my chlorine problems. Keep at it with lots of bleach. This forum is a God send to me.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts