We received our Taylor K-2006 test kit today.

As a reminder, our pool is an Intex above-ground, metal-framed pool, that holds around 4,600 gallons (closer to 5000 when fuller after it rains). We've had it for a bit over 2 weeks now, and are in the process of switching to BBB method. Lately, we've only added bleach (6%).

These are the numbers we got.

FC 2.0 ppm
CC 0.5-1.0 (was hard to tell, appeared clear after 1 drop, but then became slightly pink after sitting for a minute, so we added another drop)
pH 7.8
TA 110 ppm
CH 140 ppm (vinyl pool, don't think this matters much)
CYA - We guess maybe a bit less than (but near) 30 ppm... We could still faintly see the dot at the 30 ppm mark. We actually went to the top and the dot was still extremely faintly visible.

Now, I need to find out what to do with these numbers. Do we need to add more stabilizer? We leave in a bit over a week to go out of town for a week, so I want to get things in order before we go, so we don't come home to a pool full of algae like we did the last time we went out of town (and it was only 4 days then, but we hadn't put any chlorine in yet, because we were stuck on "balancing").
How do we know what is a good chlorine level to aim for? I've got the pool calculator handy, so I can figure out how much to add. Do we need to worry about this CC level? Is this pH level okay?

Thanks for any advice!