3rd plug hole found and plugged, although it was on the bottom left side of the housing and a pain to get tightened. I got my filter running and vac'd to waste. There is water leaking from around the top of my filter, just below the lever to switch from filter to waste, etc... Also, when I shut my filter off and changed the lever to waste, water sprayed out of the clear plastic lens while it was still under pressure, but only for a second or two. Any ideas on the leak and spraying of water? There is a clamp with screws around the top of the filter that appeared tight, although I didn't get a screwdriver and try to tighten them any more. Are these backed off any during closing and something that I should snug now?

Sorry for all the questions, but again, I usually have all of this done by my pool guy and have no idea what I am doing. I can see him being more and more useless to me, with the baquacil conversion completed last year and learning how to open it myself the hard way. I also see more and more money staying in my wallet as a result.