Hello,

My apologies Watermom. I appreciate the time that each and every person takes to respond to my posts and by no means do I want to make it more time consuming than necessary.

I have an Intex 12' x 30" vinyl pool for my little guys.
Upon filling the pool 3 days ago my numbers were:

PH 7.7
TA 40ppm
CH 40ppm
FC 0.4 ppm
CC 0

I used the 25ml sample.

I have been adding dichlor granuals 1TBSP each day. I was going to use approx 1lb over the next few weeks and then switch over to bleach. However, upon testing today I noticed that PH had dropped quite a bit to 7.0. and the chlorine has changed a bit also as mentioned above.

Not sure what to do.