+ Reply to Thread
Results 1 to 10 of 28

Thread: Need help making pool "swimmable" please

Hybrid View

  1. #1
    Join Date
    Jun 2010
    Location
    South MS
    Posts
    55

    Default Re: Need help making pool "swimmable" please

    DH tested the water this evening and our best guess is the chlorine level was about 6 or so. He added about a liter of bleach to the pool tonight. We're pretty sure the algae is dead, and we're just waiting for the pump to be able to clear the water up for us. I'm not really wanting to get back in until I can see the bottom of the pool in the middle. We are considering upgrading to a larger pump/filter set.
    I've been writing my thoughts about that in a different forum:
    http://www.poolforum.com/pf2/showthread.php?t=10060
    Tricia from South MS
    Intex Above Ground Metal-Framed Pool 15' x 48" (~5000 gallons) installed 6/21/10, and now using BBB (well only one of the B's so far) and Taylor K-2006 test kit

  2. #2
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Need help making pool "swimmable" please

    I posted a response to that one in the other thread...
    Janet

  3. #3
    Join Date
    Jun 2010
    Location
    South MS
    Posts
    55

    Default Re: Need help making pool "swimmable" please

    I just wanted to write that DH says the pool is getting clearer by the day. He & I got in the pool tonight (after the kids went to bed) and it was fine and very nice. We are going to check the chlorine level again tonight and add some more bleach before we go to bed. We are still waiting on our Taylor K-2006 kit to arrive.
    There isn't one bit of slime to the pool floor or wall, which is nice!
    Tricia from South MS
    Intex Above Ground Metal-Framed Pool 15' x 48" (~5000 gallons) installed 6/21/10, and now using BBB (well only one of the B's so far) and Taylor K-2006 test kit

  4. #4
    Join Date
    Dec 1969
    Location
    Ontario.
    Posts
    272

    Default Re: Need help making pool "swimmable" please

    Congrats Tricia. Great folks on this forum. I've walked in your shoes, and it can seem to take forever to go from green to cloudy, then finally clear. When I have algae, I always err on the side of caution and would rather have to much chlorine than let the level get to low and give the algae a break.

    Many new pool owners get hung up on "balancing" their water and waiting way to long before adding chlorine, when it is essential to get sanitizer in to the pool. Enjoy your summer of swimming.
    IG 32' x 16', vinyl 19,500 l, Sand filter, Hawyard Low NOx 250,000 btu heater
    Heating? Great info on why a solar cover saves $$$?
    http://energy.gov/energysaver/articl...ng-pool-covers

+ Reply to Thread

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  4. Timer to motor and aquarite..."Y"or "T" fitting?
    By BND in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 04-23-2007, 02:59 PM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts