+ Reply to Thread
Results 1 to 10 of 28

Thread: Need help making pool "swimmable" please

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Need help making pool "swimmable" please

    Ultimately, all decisions about your pool are your own--we can only suggest.

    However, if your pool is still green and cloudy, it means your chlorine is being "eaten" killing it. If when you test you see chlorine levels have dropped a lot from the last test, your chlorine is being consumed.

    If, however, your water is clear, and despite the difficulty with the dilution test (Hold a white card behind the cell--it may help), you don't see much change in the test, it means your chlorine is holding and it's probably safe to swim in it.

    But, if the chlorine is high, wear last year's bathing suits. You'll be ok but the suits may fade.

    But the ultimate decision and responsibility is yours. It's your pool and we aren't there to see it.
    Carl

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Need help making pool "swimmable" please

    Hint, hint ---- Buy a K-2006 --- hint, hint. (Was that subtle enough? )

    Really, it will make this whole pool care thing SO much easier for you. Then, you won't have to be diluting and trying to decipher how high the cl is. The good kit will tell you precisely how high it is.

    http://www.poolforum.com/pf2/showthread.php?t=10006

  3. #3
    Join Date
    Jun 2010
    Location
    South MS
    Posts
    55

    Default Re: Need help making pool "swimmable" please

    Quote Originally Posted by Watermom View Post
    Hint, hint ---- Buy a K-2006 --- hint, hint. (Was that subtle enough? )

    Really, it will make this whole pool care thing SO much easier for you. Then, you won't have to be diluting and trying to decipher how high the cl is. The good kit will tell you precisely how high it is.

    http://www.poolforum.com/pf2/showthread.php?t=10006
    I'm sure you read so many posts here (and are very helpful, thanks so much!) that it's hard to remember what you read by whom, but I did mention in my initial post that I've already purchased the Taylor K-2006 earlier this week, just waiting on it (not so patiently I suppose) to arrive, and doing the best I can in the meantime to guesstimate the chlorine levels to see if we need to add more.

    Quote Originally Posted by blessedbeingmom View Post
    Then I started reading more posts here and ordered the Taylor K-2006 test kit this past Monday (June 28). It was late Monday, so we probably won't get it until at least next week. Not sure how long it will really take. We ordered it from SPS Swimming Pool Supply company.
    I try to be a quick learner!

    Thanks again!
    Last edited by blessedbeingmom; 07-01-2010 at 04:23 PM.
    Tricia from South MS
    Intex Above Ground Metal-Framed Pool 15' x 48" (~5000 gallons) installed 6/21/10, and now using BBB (well only one of the B's so far) and Taylor K-2006 test kit

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Need help making pool "swimmable" please

    Quote Originally Posted by blessedbeingmom View Post
    I'm sure you read so many posts here (and are very helpful, thanks so much!) that it's hard to remember what you read by whom
    You got that right! But, sorry I missed (or had forgotten) that you had already purchased. Sorry, sorry! (Sometimes, especially on some of these threads that get pretty long, it is time-consuming to have to go back and reread the whole thread each time a new post is added. Especially at times when there are lots of posts waiting to be answered. Sometimes we miss things, but really do try and do our best!)

    Hope your kit will arrive soon!

  5. #5
    Join Date
    Jun 2010
    Location
    South MS
    Posts
    55

    Default Re: Need help making pool "swimmable" please

    Quote Originally Posted by Watermom View Post
    Sometimes we miss things, but really do try and do our best!)
    Absolutely! I am very appreciative!
    Tricia from South MS
    Intex Above Ground Metal-Framed Pool 15' x 48" (~5000 gallons) installed 6/21/10, and now using BBB (well only one of the B's so far) and Taylor K-2006 test kit

  6. #6
    Join Date
    Jun 2010
    Location
    South MS
    Posts
    55

    Default Re: Need help making pool "swimmable" please

    DH tested the water this evening and our best guess is the chlorine level was about 6 or so. He added about a liter of bleach to the pool tonight. We're pretty sure the algae is dead, and we're just waiting for the pump to be able to clear the water up for us. I'm not really wanting to get back in until I can see the bottom of the pool in the middle. We are considering upgrading to a larger pump/filter set.
    I've been writing my thoughts about that in a different forum:
    http://www.poolforum.com/pf2/showthread.php?t=10060
    Tricia from South MS
    Intex Above Ground Metal-Framed Pool 15' x 48" (~5000 gallons) installed 6/21/10, and now using BBB (well only one of the B's so far) and Taylor K-2006 test kit

  7. #7
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Need help making pool "swimmable" please

    I posted a response to that one in the other thread...
    Janet

  8. #8
    Join Date
    Jun 2010
    Location
    South MS
    Posts
    55

    Default Re: Need help making pool "swimmable" please

    Quote Originally Posted by CarlD View Post
    Ultimately, all decisions about your pool are your own--we can only suggest.

    However, if your pool is still green and cloudy, it means your chlorine is being "eaten" killing it. If when you test you see chlorine levels have dropped a lot from the last test, your chlorine is being consumed.
    Of course, I realize you can't tell me what to do. Thanks for the help though. The pool is only cloudy, not the least bit green at all. After we rinsed the filter thoroughly last night, we checked it again this morning, and again, there was a light brown algae coating the filter. We replaced the filter this morning. Our chlorine level (via dilution method) was probably over 20. It was definitely over 10 last night, and we added about 2 quarts of bleach before going to bed. I'm pretty sure the algae is dead, just needs to be cleaned out thoroughly. I'm thinking about buying a bunch of replacement filters and just replacing them daily for a few days or something to help it clear up faster. Not sure about that though.

+ Reply to Thread

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  4. Timer to motor and aquarite..."Y"or "T" fitting?
    By BND in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 04-23-2007, 02:59 PM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts