Newbie - Green Pool

[waterbear]

The K-2006 actually includes TWO chlorine tests: The FAS-DPD drop test we all recommend, and a simpler OTO test that uses a standard Taylor OTO/pH cell. The OTO side only goes to 5ppm for Chlorine but the FAS-DPD test doesn't use the cell at all and measures FC up to 50ppm.

I think that's the source of your very understandable confusion.

We are all going to have to remember that for the future! It's so automatic to all of us we don't even think about it anymore.

You are confusing the K-2006 with the kit that Ben used to sell. The K-2006 does not include the OTO/pH small comparator (which is actually the Taylor K-1000 OTO/pH kit) and uses the large pH comparator with acid and base demand tests.

[CarlD]

You are confusing the K-2006 with the kit that Ben used to sell. The K-2006 does not include the OTO/pH small comparator (which is actually the Taylor K-1000 OTO/pH kit) and uses the large pH comparator with acid and base demand tests.

Hmmm....Looks like you are right AND I am wrong (What? Did the planets allign or something??? )

So the question goes back to Ponytailhair: Why did you think that the K-2006 only goes to 5ppm for Chlorine?

[ponytailhair]

To answer CarlD, I googled Taylor K-2006, and the one I looked at had this summary: "A complete DPD test kit designed for service people, commercial pool operators and health dept officials interested in economy & portability. Tests for Free & Total Chlorine (.5 - 5.0 ppm) Bromine (1.0 - 10 ppm), pH (6.8-8.2), Acid Demand, Base Demand, Calcium Hardness, Total Alkalinity and Cyanuric Acid. Uses 3/4 oz reagents.Plus Titrants to improve accuracy."

I do not want to break any rules about advertising, especially since I don't even know this company, so I will not say which google result I got this information from.

This is all like a foreign language to me, so thanks for your patience and help!

[CarlD]

To answer CarlD, I googled Taylor K-2006, and the one I looked at had this summary: "A complete DPD test kit designed for service people, commercial pool operators and health dept officials interested in economy & portability. Tests for
Free & Total Chlorine (.5 - 5.0 ppm) This is the DPD test, not the FAS-DPD TEST
Bromine (1.0 - 10 ppm) Unless you use bromine instead of chlorine, this is not relevant.,
pH (6.8-8.2) This tests how acid or alkaline your water is.
Acid Demand, Base Demand Ignore these two. They sound more important than they are,
Calcium Hardness Measures calcium and is only important in concrete/plaster pools or when it goes too high in vinyl pool. I measure this once or twice a season since my pool is vinyl,
Total Alkalinity Loosely, this measure how resistant pH is to change so it doesn't bounce around. It's more than that but that's enough to know for now.
and Cyanuric Acid Stabilizer: A two edged-sword. You need it to keep chlorine from being destroyed by UV rays. Too little is a problem but too much is a bigger problem.

Uses 3/4 oz reagents.Plus Titrants to improve accuracy."

I do not want to break any rules about advertising, especially since I don't even know this company, so I will not say which google result I got this information from.

This is all like a foreign language to me, so thanks for your patience and help!

Thanks for being concerned but even if you had listed the vendor you would have not been in violation--especially since you are CRITICIZING that vendor.

Now that sounds exactly like the description of the K-2005 kit. The clue is the K-2006 tests Free Chlorine and Combined Chloramines. You calculate Total Chlorine by adding FC and CC together. The 2005 kit calculates Free Chlorine and Total Chlorine and, instead, you calculate Combined Chloramine by subtracting FC from TC.

[waterbear]

If you are shopping on Amazon then this thread has a link to the proper kit, the K-2006.
Also, if you purchase the kit through this link you will help support the forum and keep it going.
http://www.poolforum.com/pf2/showthread.php?t=10006

[PoolDoc]

Hey folks,

I've got links to Amazon that ARE for the K2006 -- different Amazon associate. The photo is DEFINITELY an K2006 and it's listed as an "FAS-DPD" kit, so I would assume that's what they are delivering.

And, if you purchase that way, the Pool Forum gets 8%!

Here's the post:
http://www.poolforum.com/pf2/showthread.php?t=10006

PoolDoc

[sturev]

Ponytailhair, what does the number say on the sticker on the top left corner on your kit?

I ordered a K-2006C kit from Amazon (sold/shipped by In the Swim), and it was really the K-2005C... It was mislabled on Amazon (and I'm sad to report it still is!!! even after I spent the time to explain it to them and they had to deal with my return/credit as they don't stock the K-2006 or the K-2006C).

[sturev]

I think I misunderstood your post... I read it like you had the kit and were asking a question about it's use... It appears that you don't own one yet?

[ponytailhair]

No, sturev, I don't have one yet. But that's a good tip about NOT buying one on Amazon! Thanks.