+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: weight vs. volume

  1. #1
    Join Date
    Jun 2010
    Location
    new york
    Posts
    60

    Default weight vs. volume

    Silly question. If I'm supposed to add 1oz of cal-hypo is that ounce in weight or volume?

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: weight vs. volume

    It's usually sold by weight.

    If they want you to go by volume it's usually "1/4 cup".
    Carl

  3. #3
    Join Date
    Jun 2010
    Location
    new york
    Posts
    60

    Default Re: weight vs. volume

    thanks. that makes sense.

  4. #4
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: weight vs. volume

    1 oz dry weight is 1/8 cup or 2 tblsp.

    Here are some links to conversion charts:

    http://www.exploratorium.edu/cooking...surements.html

    http://www.foodgeeks.com/resources/conversion_charts#we see "Equivalents"

    You can also use Google to do the conversion. In the search bar type: 1 oz = ? cups or any other conversion.
    Last edited by AnnaK; 06-29-2010 at 05:35 PM. Reason: Corrected a typo
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  5. #5
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: weight vs. volume

    Quote Originally Posted by AnnaK View Post
    1 oz dry weight is 1/8 cup or 2 tblsp.
    This is not always true. particularly with pool chemicals that have different densities. It is a rough approximation at best but if you want to convert a weight measure to a volume measure you will need to do it separately for each item, based on it's density.
    A pound of DE powder takes up a lot more space than a pound of trichlor tabs.
    For example 1 tablespoon of steel ball bearings and 1 tablespoon of rice krispies each would weigh 1/2 oz by the formula above but we don't even need to measure and then weigh them to know this is not going to be true!

    There is no hard and fast rule that will successfully convert a volume measurement to a weight measurement or vice versa.

    However, an inexpensive kitchen or diet scale is excellent for weighing out pool chemicals.
    Retired pool store and commercial pool maintenance guy.

  6. #6
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: weight vs. volume

    Examples of densities of some pool chemicals are in this thread where the second number (bulk) is the relevant one. You can see that densities vary from 0.837 for calcium chloride dihydrate to 1.44 for dry acid. The one ounce weight to one ounce (1/8th cup) volume approximation is only correct when the density is 0.959 g/ml.

    Sorry for the bad formatting...the "CODE" formatting on this forum no longer works (that's used to force a fixed space font which is good for lining up columns).

  7. #7
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: weight vs. volume

    Confused yet, purplegirl?


    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  8. #8
    sturev's Avatar
    sturev is offline Registered+ Thread Analyst sturev 0
    Join Date
    May 2010
    Posts
    89

    Default Re: weight vs. volume

    I wonder if the weights make a difference when she adds them to her green pool that's filled with iron? Gotta be heavier!
    Evan S.

    AG FastLane Pool, 9x13 ~ 3,000 gal, COVERED/INSULATED 23X7, 30 gpm water pump (runs 12 hrs a day) AND a Hayward Power-Flo LX 1.5 hp Pump (only used on occasion for the pool sweep), Hayward 100K BTU Heater, Waterway Flo-Pro Skim Filter & Slime Bag, no other filters

  9. #9
    Join Date
    Jun 2010
    Location
    new york
    Posts
    60

    Post Re: weight vs. volume

    sturev are you making fun of my green pool

    I would probably be confused AnnaK if I didn't have a scale, but since I do I'm not going to worry about all the rest, I'll just weigh everything out.

    But thanks to everyone for the info. I never realized having a pool was so much work

  10. #10
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: weight vs. volume

    Your pool won't always be so much work. Once you have done this for awhile, it will become routine and will be easy. I typically spend less than 5 minutes each day on my pool. That is it. (Other than throwing in the Wanda the Whale vacuum a couple of times per week. But, then she does the work, not me!)

+ Reply to Thread

Similar Threads

  1. Ever test the weight of your chemical containers?
    By famousdavis in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 07-28-2011, 11:59 PM
  2. Solar covers - 12 Mil vs 16 mil - weight an issue?
    By deckview in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-06-2011, 03:55 PM
  3. weight of baking soda
    By ekaifes in forum Using Chlorine and Chlorinating Chemicals
    Replies: 4
    Last Post: 06-09-2008, 12:31 PM
  4. Pool Volume
    By isdsms in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 09-17-2007, 12:23 PM
  5. h2o volume of my pool?
    By dhale63 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 5
    Last Post: 05-11-2006, 12:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts