My advice:Originally Posted by ohpoolboy
1) The installation is very simple - download the manual and check it out. I see no advantage to paying someone to do this. Many times I have paid extra to have someone do a job for me and then later dissapointed in the service after the sale!
2) Plan now for the AutoPilot! The Control box should be mounted out of direct rain and sunlight. I simply inserted a small piece of plywood into the bottom of a topless Rubbermaid box and mounted it on a post (my location was behind a fence and out-of-sight), cut the lower end out, and the Control box fit nicely inside. I then used two pieces of 3/4 inch liquid tight conduit to protect the wires connecting the AutoPilot to the Manifold and Cell (the conduit lies across a foot path and I wanted to protect them). These wires are 12 feet long so be sure to figure this in when deciding where to locate the AutoPilot Control. The Manifold assembly needs about 26 inches between the filter return and the pipe out of the ground - I had only 14 inches after removing my tablet chlorinator so I had to rotate my DE filter to get the return pipe further away.
The AutoPilot is well engineered and the installation is simple. You can do it!
Bookmarks