I need to lower my alkalinity (190) I understand I need to do the muriatic acid thing...but I don't have access to a spa jet for areation and the pool water is too cold for a bunch of 10 year old boys. How should I attempt aeration?:confused:
Printable View
I need to lower my alkalinity (190) I understand I need to do the muriatic acid thing...but I don't have access to a spa jet for areation and the pool water is too cold for a bunch of 10 year old boys. How should I attempt aeration?:confused:
Point the return eyeballs toward the surface.Quote:
Originally Posted by csevel
There's only one return eye and the water doesn't really break the surface when I redirect it.:confused:
How about getting a fitting that will screw into your return, have an elbow on it and attaching a piece of pvc pipe to direct the return flow up and out of your water, so it comes splashing back in.
That's where I'm headed, I think :)
I used my Polaris 380. Took the bag off. Then placed it in the corner of the stairs at a slight angle so that the venturi jets also contribute with a fountain effect and it doesn't run around. The main water jet in the back works great and you can also use the 'tail' jet to aerate. Mucho bubbles. Of course, it may wind up breaking the Polaris, but mine is still working fine.
I have a light/discharge combo that shoots out the side. This return is very easy to shoot right out of the water.
If you have a regular return, but it won't break the surface...you could try buying one of the fountain attachments.
http://www.poolmart.com/images/accent1.jpg
http://www.poolmart.com/aquaflower.htm
dan
There's a little fountain, costs about $20, that you unscrew the eyeball and screw the fountain into the return instead. It can spray water about 10' up and 30' out. Works GREAT!
I bought the fountain for the looks and ambiance and used it last weekend for a party. it brought down my TA by 10 to 90(I did not need the drop) in 7 hours. I have a 33000 gal pool. I hooked it up to pool cleaner and plugged the other returns using rubber freeze plugs - I don't have eyeballs - Old pool.
Amir
You can also use a submersible pump and a short hose or just put it on the steps.
I like that, I will probably do it sometime to see how it works.:DQuote:
Originally Posted by superjet
Being a new guy, I don't want to argue, but are we sure that the aereation method is really permanent? If it's just adding CO2 to the water, that will only affect the alkalinity temporarily. Once the aeration is off, the CO2 will stabilize with the atmosphere and the alkalinity will (I thought) return to where it was before.
What is the problem with high alkalinity anyway?
TW
The process removes CO2 from the water, not adds it.
CHEMISTY NERD ALERT!Quote:
Originally Posted by aquarium
High alkalinity makes it difficult to adjust pH to the proper range and can contribute to cloudiness in the water and scaling. Alkalinity is the measure of the carbonate/bicarbonate/carbonic acid buffer system in the water. By lowering the pH you force the buffer system to more carbonic acid and less bicarbonate/carbonate and by then airating at the lowered pH you drive off the CO2 which lowers the amount of carbonic acid so the equilibrim moves toward the carbonate/bicarbonate side with the effect of the pH rising and the alkalinity lowering. Very little atmospheric CO2 dissolves at the water surface in a pool because of the normal pH and TA levels of a pool. IF the TA and pH are low then atmostpheric CO2 could have a greater impact
I was reading these posts and I was wondering.....
My Alk was a little high yesterday (and I would rather add small amounts to keep my water in check than have to worry about adding large quantities of stuff)...but anyway,
Can't you just add it slowly to the skimmer or do you have to sprinkle over pool water? I am so DUH:o (but slowly learning from you all:cool: ) I should NOT add anything to PH (as the acid will decrease it--correct? Is that temporary(the decrease in pH?)
My return "eyeball" is pretty close to the top and ripples the water so do I still need to add a jet or "gadget" to aerate?
How much does the pool store charge for Alk decreaser?
I have an AG vinyl -- 16000 gal
Thanks !!
Michelle
First you should NEVER add acid to the skimmer! It can cause damage.
If you want to lower your ALK you need to add enough acid to get your pH down to 7.0 (but not any lower with a vinyl pool!) and then airate to lower the TA. As you airate your pH will go up and your TA down.
Hope this helps
Thanks...... did NOT know about not adding to skimmer.
I checked the Alk again this morning and it was at 90-100 so I am going to wait a few more days tilll I test again and go from there. (90 if you count the water turning very light pink and 100 if it has to be more dark) I have a Taylor kit.
Would the "eyeball"/return be ok to use the way it is (it really pushes the water on top of the pool---most I know (have seen) are under the water by about 2 inches)....???
THANKS:) :) :) :)
Michelle
Hope this helps!Quote:
Originally Posted by michladny
Thanks A Mill !!!!! ;)