I'm told that it takes half as much as regular sand in a filter and filters as well as diatomaceous earth filters. Any down sides?
Printable View
I'm told that it takes half as much as regular sand in a filter and filters as well as diatomaceous earth filters. Any down sides?
I have it and it's OK.
It only uses half the amount as filter sand (by weight) because it's half as dense.
The theory is that an individual piece of zeolite has very, very small passages through it that the water passes through and that catch very, very small particles (just like DE). The problem with that theory is that the individual pieces of zeolite are relatively large (huge compared to DE)and much of the water goes between the pieces of zeolite rather than through those tiny passages. The smaller particles of course can go between the particles with the water.
Overall, I'm fairly pleased with it. I have the ease of use of a sand filter and I think that it filters better than sand. At the same time, I'm pretty sure it does not filter as well as DE.
Some folks here use a sand filter filled with sand or zeolite and add a small amount of DE in the hopes of getting the best of all worlds. I do that as well and do see a marginal improvement over the zeolite alone.
We began selling the stuff last summer. Everyone seemed to like it and I had a few comments from people with lights that the water looked much better at night. The most important thing if you do get it is to backwash upon startup. If not, the pool will go cloudy and become very difficult to clear up.
Brad
Do you mean that one should backwash everytime they start up the pump / filter? Is that true only if one is using zeolite?Quote:
Originally Posted by Waterworks
I'm not sure exactly what Brad was saying, but you definitely don't need to backwash a sand filter, whether filled with sand or zeo, each time you start the pump; just when filter pressure rises by 8 or 10 PSI from normal.
I'm sure Brad was talking about initial startup. As in, loading it for the first time. You need to backwash and rinse, wait, then do it again several times. When backwash and rinse water is clear, your good to go.
http://www.zeobrite.com/PDF/InstallationGuide.pdf
Cheers
Thanks BDavis, that's exactly what I meant. The very first time you start up the filter with the new zeolite sand you must backwash a number of times, otherwise you will have cloudy water problems.
Brad
When I first opened my pool this year, the water was a little cloudy. I maintained my chem levels & filtered 24/7 for almost a week to no avail. I then decided to change my sand & switch to zeolite. After the switch, my water was crystal clear in less than 2 days.
The only drawback I see to it is that I was told not to add anything through the skimmer so everything will have to be dumped straight into the pool.
Brad, On re-reading that, what you wrote was perfectly clear. I must have been even slower than normal last night.Quote:
Originally Posted by Waterworks
Any explanation why not to add stuff to the skimmer? I guess I can understand acid but things like borax, baking soda, and 6% bleach are pretty benign I would think.
Al
I've been using Zeolite, and I do Add stuff through the skimmer, it has NEVER caused a problem.
I do understand why you'd have to backwash on first use, the zeobrite/lite is a mineral and during transport it actually grinds against itself creating a fine powder, this powder needs to be eliminated and not blown into your pool.
However, if it goes into your pool, just shut the pump off for a day or two, let it settle (even adding some floculant will help bind it with the rest of the foreign stuff), add some DE into the skimmer and vac it out - the DE will catch it and you can backwash it out.
No explanations other than that the zeolite is REAL temperamental about what goes through it & will need to be recharged (or something like that) more often.
I saw this on an Internet site advertising Zeosand.
>>Can the chloramine control be renewed? Yes. Like any water softening resin, the ZeoSand ammonium trapping can be renewed with a saltwater rinse. Drain the filter, fill with a 10% salt solution, and let stand for at least two hours. Then, backwash to waste.<<
So, does this mean that Zeosand performs differently with a Salt Generator system than a clorine system? Salt would be run through the system at every backwash. I know it is not 10% salt, but it seems like frequent backwashes would have the same effect.
Beary
Quick question. Do you think that its okay to mix Zeosand and regular pool filter sand?
I wouldn't. You'll probably gain the disadvantages of both.Quote:
Originally Posted by simsjim
anyone useing Zeosand mixed with regular sand? is that ok? good/bad? thanks
I wouldn't mix the two--as Carl said, you'll likely get the disadvantages of both. I switched to zeosand in the middle of last year and frankly I think it does a better job (although it's harder to get out of the pool than regular sand)
Janet
Been using it for over a year now and the pool is clearer than ever. I would recommend it.