Weighing down Wedding Cake Steps ?
Hi everybody.. We removed our Wedding Cake steps this afternoon to clean them.. WOW what a mess. I have never seen that much algae.. I know that these steps are notorious for their poor circulation which make them an ideal breeding spot for algae, but due to health problems they are the best way for my hubby to get in and out of the pool so they have to stay.. We are going to drill a few more holes and hope for improved circulation. My question to anyone that has these steps in their pool is what do you use to weigh them down?? We're open to suggestions.
Thanks,
Luci
Filter Sand vs. Play Sand
For the past two years, we put regular sand to hold down our stairs. Is there a difference between Play Sand and Filter Sand? Someone told me that Filter Sand is better. Also, how did you put the sand in the pool? We wrapped it in 3 plastic garbage bags each. However, algae still grows. Any suggestions? Thanks.
Re: Weighing down Wedding Cake Steps ?
We just had a 24' round installed and it comes with similiar steps also requiring sandbags. I was thinking about stacking some weights in there instead. Anyone think this might work or be a bad idea?
Re: Weighing down Wedding Cake Steps ?
The problem I had was that I didn't want to attach it to the deck since I needed to constantly move it to clean. By not attaching to the deck, the back end floated up. They were nice for the little one. But we have moved to a straight ladder.
Re: Weighing down Wedding Cake Steps ?
We've had bad luck with the large sand filled ziplocks and with the weights too. This year I plan to fill some empty bleach and milk jugs with concrete...it should do the trick.
dan
Re: Weighing down Wedding Cake Steps ?
Hi guys....just an idea to weigh your steps down safely. We got 3 pieces of 3-4 inch pvc capped off one end w/ pvc cleaner and adhesive. Then we filled the tubes with driveway rock and capped off the other end. THis makes for a clean, easy way to weigh down the front end. Easy to remove.....just make sure you glue the ends on well. The rails that you attach to wedding cake steps help hold down the back end, if you need more help there, make a few more and drill small holes through the top part of the back opening and concoct a way to hang a few more. There is a few pix on this site of someone who had done that. Just an FYI.. hope this helps.