Printable View
sc-pierce, the reason I want to stop using this system is because it is waaaayyy toooo expensive! For not using much chlorine, it sure sucks it outta them little bac-pacs!!!
Grace, don't tell me it will change the whole ball game!! :( You're right of course, nothing is ever easy!!!!
can't disagree there.
Oh, and Grace to answer your earlier question, Shepherdsville is near Louisville.
i am admittedly a rookie here, but if it were my investment i would completely disconnect the system (or have someone more qualified do it more likely) let it cycle for a day or two, then test again and make adjustments according to the BBB methodology. since copper is the active ingredient in algaecides it's unlikely that you will have severe problems immediately, but just to be safe i would try and let it cycle a couple days with the system disconnected before i added anything else to the water.
That looks like the same system as the Nature2 system and you should be able to just remove the Canister and one hose, then connect the other hose where the removed one was. (makes sence to me...)
I simply do not know if it will change things or not :confused: The mention of metals scares me, simply due to what I have read here about staining and sequestering and stuff. But there are copper-based algeacides (not usually recommended by the smart folks here) that can be used in a chlorine pool, so someone else with more knowledge of copper products will have to chime in. Sorry I can be of no further assistance :(Quote:
Originally Posted by circlenranch
a metal remover would get rid of the excess ions. i think
Thanks for your suggestions! I have just come back from having a green pool, (& still a little cloudy) so I am a little leery of disconnecting it and not putting anything in.
well...then i would add some bleach to the water in front of the jets and have some borax on hand to adjust the ph and some baking soda to keep it clear.
Thanks SC!!