Stains returning

After I did the ascorbic acid and the seqestering agent my pool looked great. I slowly raised the chlorine level with bleach and a couple of pucks in the feeder. My PH didn't drop much, so I added a little Borax. Now about 2 weeks later I see the stains returning. I backwashed the filter after the treatment. I added to my last post but got no response. All my readings are there. I just added more sequestering agent in the hopes it will clear up without another dose of ascorbic acid. I can't figure out what is going on. I haven't added well water, and my well is not supposed to have any iron anyway.

HELP !

Marty

You either did not have enough sequestering agent in the water or you brought your chlorine levels up too quickly. Or possibly you brought you pH up too high with the borax. Post your numbers, it would help.

Thanks Waterbear,
I had put my readings in the earlier post I had edited. I added another bottle of sequestering agent last night (supposed to treat 20k gallons, I have 18k) I do think it looks a little whiter this morning. Here are my readings, the only change seems to be the CYA. FC=1.5; CC=0.5; TC=1.5; pH=7.4; ALK=70; CAL=30; CYA=100; TEMP=85. Will I need to add sequesterant on a regular basis to prevent staining?
Again thanks for your help.
Marty

Quote:

---

Originally Posted by MartyW

Thanks Waterbear,
Will I need to add sequesterant on a regular basis to prevent staining?
Again thanks for your help.
Marty

---

Yes, keep adding the recommended maintenance dose and you need to keep an eye on your pH...don't let it get above 7.6 or staining could occur again.

So if I understand this, the metal is in the water and it can't be removed? I will always have to use a sequesterant as routine maintenance? Is there other sources to purchase it in larger quantities?
Thanks for you help

Marty

Quote:

---

Originally Posted by MartyW

So if I understand this, the metal is in the water and it can't be removed?
pretty much, unless you drain and refill with water that has no metal or the metal comes out of the water as stain.
I will always have to use a sequesterant as routine maintenance? Is there other sources to purchase it in larger quantities?
Not that I know of but the maintenance dose is only a couple of oz. ususally every week or two....sometimes you can get by putting it in once a month.
Thanks for you help

Marty

---

hope this helps.

Thanks again, I appreciate all your help.

Marty

I am going to be using Metal Magic by ProTeam this week and it (in theory) will make the iron in the water "crystallize" so that it can be filtered and vaccuumed out.

You aren't Marty Weston by any chance are you?

No, the last name is Wagner. Let me know how the Metal Magic works. I suspect my metal is probably copper from my heater, although I really try to keep my pH high enough to keep it from leaching the copper out.

Thanks Marty

I will post after I use the metal magic.. I think it's scheduled for delivery tomorrow. Marie (mbar) is also trying it out, she is actually who gave me the idea to try it.

I would think your heater is where the metals (copper) are coming from. I don't have a heater so hopefully once I deal with the metals they will be out, until I have to add water or something.