Printable View
What a great site and forums. Thank you for being brave and starting it.
OK, chlorine first.
Now pH; but both Borax and bicarbonate are listed as adjusting agents, one place or another.
I've drained and refilled my 13,000 gallon in ground swamp, added chlorine to > 10 ppm, have clear water and 7.0 pH. Pump is out being serviced.
Please point me to the next step.
What kind of chlorine did you add? Ingredients, please and not just a product name.
What kind of kit do you have?
Add a couple of cups of Borax. Since you don't have a pump you can sprinkle it around the pool or dissolve it in water and then pour that around the pool.
How long will you be without a pump? You can keep your pool from turning green by adding some bleach. I had to do that a couple of years ago when we had a huge storm and were left without power for a full week. I just poured it in and we stirred it around the best that we could.
Welcome to the Pool Forum!
2 pounds dichlo-s-triazinetrione
2 pounds calcium hypochlorite
CYA left over from last year. (Ouch)
A brand new Taylor kit ¿1006C?
4 pounds borax, stepwise
Produced:
CYA 80
pH 7.4
FC 6 ppm
TA 100
Calcium Hardness 120
The pump is recirculating again.
Do I continue with borax to pH above the eye's or use some bicarbonate?
Thanks for the help, and again for the web presence.
At this point, with a CYA of 80, you won't want to use any more dichlor or CYA. You can use cal-hypo for a little while if you still have it left but will want to monitor your CH reading. You don't want it to get too high. Your best bet is to just use plain, unscented bleach.
Take a look at this chart. It explains the connection between CYA and needed chlorine levels:> http://pool9.net/cl-cya/
For a CYA of 80, you'll see that you want to always keep your chlorine between 5-10ppm. Letting it drop below that is an invitation to algae. You'll probably want to bump the chlorine up a little this morning so you don't drop too low today.
The pH, TA are both just fine. You don't need any Borax or baking soda at this point.
(Until you registration is completed, you won't be able to see the rest of the forum while you are logged in. So, copy that link and then paste it into a browser window after you log out.)
Hope this helps!