New AquaPure PLC 1400 always shows Cell Reversing

Hi all,

Wondering if someone can shed some light on what might be happening. I upgraded my older square AquaPure 1400 to a new one. In the kit I bought it had a new cell and the little TriSensor Adapter board.

I have an older AquaPure 1400 with the AKC09 front board and in the directions that came with it, it was indicated to use the jumper on AKC13 boards. When I run it without the jumper, I get an error of 172 and 180 so I thought, "hey, why not" my board might be older and put the jumper on - when I do that all seems to work, but the panel always shows that the cell is reversing.

When the jumper is off, I get a service light and nothing else.

The firmware of my board is 11230A05. Any ideas on what I did wrong?

I tried calling Zodiac but they said to call a service person since they don't talk to owners... I can, but the AC on the house died a couple days ago and I am seeing what I can do myself....

Thanks, Chris