Multi-Port Does NOT have a "Waste" setting
Hello guys, So I got a cheap pump/sand filter combo off ebay for my intex pool and now that I'm wanting to vacuum the dirt out of my pool, I notice I do not have a WASTE setting on my valve. I know I can vacuum through filter but could I also vacuum to rinse and it would be similar to waste except that it travels through the sand before it goes out to waste?
Re: Multi-Port Does NOT have a "Waste" setting
You could do that, but then the sequence would need to be "Rinse", then "Backwash".
Re: Multi-Port Does NOT have a "Waste" setting
Quote:
Originally Posted by
PoolDoc
You could do that, but then the sequence would need to be "Rinse", then "Backwash".
Yes, I would still backwash and rinse again after vacuuming on rinse. Thanks Ben.
