Kayak Camber bars

Long time above ground pool owner, first time Kayak pool owner.

The pool is up and running (32'x16'). The questions I have is how much deflection is OK on the upper channel? I followed the instruction manual and installed the specified length camber blocks but I see deflection on the 32' top rails.

Overall we like this pool better than the 24' round we used to have.

Also, is there anywhere I can sell the aluminum decking? I am replacing the Kayak decking with trex. I have the 8'x20' deck complete and the other end and will finish the sides next. Just don't need the Al decking anymore. If not it goes to the metal recyclers.

I think you should direct this question to the builder or manufacturer. I'm not sure there's much experience with Kayak pools here.

Might try Craig's list. I'm sure there is a recycler that would take them. Interested in pictures of your pool. How did you fasten the coping to the Trex?

I asked Kayak Midwest. They said a "little" was OK. I guess I was looking for a number on what they consider a little.

On the Trex decking. Routed the end of each board so it fits in the Al channel slot. Working out pretty well so far. Need to finish it all up before I will be satisified. I will try to get pics on here once I am done.

Now I am looking for wedding cake steps. Any suggestions?

Steps are not hard to find. Search for wedding cake pool steps or grand entrance steps and you will get several to pick from.