AG Pool Cove - In Canada

Does anyone know where I can buy AG Pool Coving. I would prefer to get it in Ontario Canada. Most of the stores I phone in my area (London Ontario) don't have it or it seems very outragous prices.

Thanks

Personally, I would not bother spending the money on it, I also looked into it and the stores up here DO want a kings ransome for it, you can do a better job using sand.

I hear ya on the sand but I am using a foam base instead of sand

Hi Nicker, I have a link on my site that goes to Wards. They charge $6.99 for each 24" section. With a foam base you do need these.

Best of luck, Dennis

I got mine last year from Naborhood Pool & Spa in London. They were the least expensive of the places I called....Bill

Possibly DJ's pools in Brantford, Do NOT go to Hooton's or Pioneer, they're overpriced

You should contact Gladon, the company that makes pool cove. They can probably help you out.

www.gladon.com

Thanks AquaBill, that is where I ened up getting them too. Cheapest.

Did you use a foam bottom as welll and if so hows that working for you?

Hi Nicker - It's been awhile since I checked this post. I did not use a foam bottom. I used something call 'filtercloth' that came from "Form & Build" in London. It is a synthetic woven material. I just wanted something between the sand and the liner for some protection from the things in the ground that dig little tunnels.