Forum: --cleanup--

Hello from Minnesota, We have decided to start our long awaited pool project this Spring. Pool will be a 22x46 freeform with waterfall and diving...

I'm getting quotes for a new pool. Both companies pricing is about the same (within $500). I live in Southern Virginia. The pool is on the smaller...

Hello, I have a separate underground line for my pool vacuum, and when I switch over to it, the pump loses pressure and starts to "pulse" is the only...

I want to build a pool that will use the earth as sidewalls and eliminate the need for AGP or costly cement walls. My thought was to incorporate some...

Is it possible that a very small amount of small stones/gravel laying on top of a vinyl liner (NOT beneath the liner but within the pool itself) in...

We contracted a company to build a 650sqft pool with an additional 80sqft sunshelf. they dugrebar then shot with gunite. My wife and I walked the...

I'm currently building a pool and wanted to learn about everything and anything of what to do and what not to do about them. Figured this would be a...

I have an in-ground, concrete, saltwater pool that is approx. 18 months old. The stainless steel hand rail turned dark gray/black from the waterline...

Hello..I have a Super pump 1600 1hp that I've replaced the seals, housing plate and seal plate. It will prime up but when it gets pressure on it...

Mine has given up and I need a new one... for $500!! I would rather have a dark pool. Is there a cheaper, less than $100 solution?

So first year with a pool. I have been out a town for a week and have been able to clean all the leaves out as they feel. I got things back on track...

I just bought a home with an inground, 20k gallon pool, uses a pentair fns plus DE 8 grid filter with a pentair whisperflo pump( not whispering) and...

I have a condition in a 176K commercial pool where it looks like tiny bubbles clinging to all surfaces and the tiny bubbles are bursting on the...

My pool and spa lights cannot be turned on your by either the inside controller or the outside control panel. I have a Jandy Aqualinks RS4. When I...

Had my pool painted and the workers painted my two pvc 1.5" return to pool lines. Now I cannot get my polaris or other equipment on it. I tried PVC...

Hi! I`m Mike and i hope i will be a future pool owner. Would like to read and respond to creating and maintaining swimming pool thread.

Just had pool/spa resurfaced. The spa hydro-jets were replaced. I am now seeing water drip from the candy cane vent down by the jandy valves and...

I wanted to see if I can post

Hey everyone, so I bought a house with an in ground pool and have had someone taking care of it, but have decided to give it a run by myself. Most of...

The diving board springs for my circa 1960 swimming pool have rusted and fallen apart. I would attach photos of the board and springs but I don't...

Hi, Noob here. Is there an adapter that would allow me to affix a leaf net onto a telescoping paint (roller) pole. This pole is telescoping, very...

Hi! Anybody, please, advise me a new pool heater. I had the old Pentair. Its lifetime is exactly one year. Suggest me, please, a heater of a good...

What pit falls can I avoid in building my own unground vinyl pool?

I need to redo my entire pool area. I want to resurface with pebbletec, lay down pavers and have a new pool enclosure built. House is 30+ years and...

I have an in ground play pool 36' X 15', 5' deep in the center with pebble tec finish. Problem is the hose ties itself in a knot every time the pump...

We have a bunch of bad pool light fixtures. They are about 10 yrs old. We want to go with led but the installer says that he cannot install...

Ao smith model B2983T with intergrated century timer can timer be bypassed my main board is damaged have pro logic controller which is capable to...

Is there any recommendations on a good winter pool cover pump that will last?

Greetings all, I was hoping to be approved in this forum so I can figure out if any users have any helpful information regarding my polaris 9550...

We are putting in an inground pool this month. We decided against an automatic safety cover due to cost. I am getting a little concerned, though,...