Forum: --cleanup--

2hp pump stopped working suddenly. No noise, no humming, just dead. Tested the voltage at the motor terminals and getting 248v. Removed the...

Hello, I am about to close on a house in a couple of weeks and will be a first time pool owner. I am not sure at this time as to the size of the pool...

Can I use a Haldex Hydralic Power System with a Model OMP50C gerator-type motor pump to make current for a swim pool that would have a current?

Still waiting to get activated.

Just bought a house with an inground pool. The pool is not in pristine condition. As best as I can tell it needs four things: 1) a liner, 2)...

I am a new pool owner. Like most new pool owners I followed the instructions/advice of the pool stores. After reading more on the internet about the...

Indoor pool in DSM IOWA

Just starting the process, met with Matt from Penguin Pools. I liked him, seemed very knowledgeable. They sell both fiberglass and vinyl. I will...

Hello all. First time caller here. This is my first pool (purchased my house this past may) and I have been learning as I go. There has been some...

Hello, I am in the process of choosing a pool builder. The process is quite daunting because each pool builder has their own different way that they...

Howdy. I am new to the forum. I am researching builders for my first in ground pool. I plan to finalize selection and start a build in Jan 2015. ...

I have a Little Giant blue pump that sits on my winter safety cover. It needs to be adjusted or pulled every day or so during rain in order to make...

Hello, I want to install a 3/4 or 1/2 PVC water pipe so I can add water to my pool without having to pull out the water hose and drag it to the pool....

Having a problem with my pool electronics. Breaker in the panel at the house kept tripping, so I called an electrician. To make a long story short...

My husband and I are getting ready to install an in-ground vinyl pool and are in some disagreement as to where it should be placed. Where he wants...

After 22+ years, my 20'x40' aboveground pool has been taken apart and hauled away - except for the iron support frame buried in the ground plus 2...

The model # is faded but I'm pretty sure i see 2 and a 300 in there so I'm guessing. Anyway there is a small white plastic line that runs from the...

I just bought a Hayward Ecostar VS pump. I had it installed professionally today and I am a little confused about why he calibrated it a certain way...

Hi Everyone, First time post here. I'll try to be as thorough as possible. I have an inground pool about 20,000 gallons with a DE filter, 2...

need collective thoughts on a new filter system for an Intex 9 x 18 above ground pool. Need to replace the 2nd filter system in 3 yrs... so want to...

Hello, I am a first time pool owner and we have a Barracuda G3 cleaner. It worked for a while but now when it turns on, it only moves a few feet...

I am having trouble with white spots forming on the plaster of my pools. Particularly with the pools that use salt water & keep the pool heated. ...

Hi, I have a concrete pool built in 1978 and still has it's original plaster. I need to replace about 5 cracked tiles and not sure the best way to...

We have a new 18x36 gunite salt water pool with a Hayward variable speed pump. Can someone please tell me how many hours I should run the pump this...

First off, I am a newbie and I have been reading on this site all morning...I love it! I am unable to search yet so please direct me to any...

Does anybody have any tips, suggestions or wisdom concerning replacing a liner themselves? I'm pretty handy, and saw a bunch of examples on...

New user here, though I have been lurking and reading the forums for several months. Have learned tons about pools, so thank you to everybody. I...

The gasket on the strainer lid wore out and began leaking water so we bought a replacement. The original gasket was thicker than the replacement but...