Forum: --cleanup--

Thank you for accepting my request to join this forum. I own an INTEX 30 diameter steel frame Chrystal Clear Salt Water Pool. I've owned this pool...

Hello all, I'm new on here. I have a problem with my empty cement pool. It's about 30 years old. 33,000 gallon cement floor with a fiberglass side...

Hi to all! Been reading the site info for several weeks. Have 7000 gallon AG pool in FL. Started using Taylor 2006 kit three weeks ago, when got...

I'm replacing a broken quick connect on the inlet side going into the polaris booster pump. The inlet hose currently has a manual pvc shut off valve...

My system is getting a low salt alarm. However when I ran a test with new test strips the level is actually way to high (over 5000 ppm).

I have a gunite pool and have had problems with pink slime this year. I have a sand filter and shock with chlorine. Could my problem have been...

I'm rebuilding my brothers old Aqua Flo 06620500-2 pump and ran into an issue with the bearings. I removed the 6203DW bearings and ordered 6203Z C3...

I am about to fill an above ground pool with a vinyl liner. The liner is not flush against the sides of the pool where the side meets the bottom of...

After looking at a post with pictures of droppings from a caterpillar in a pool from 2013 it seems this is what we have been having a problem with...

We bought a home last fall and the house came with a pool that I plan to renovate and use. The only catch is the pool is a a three lane olympic lap...

Hi, I am looking to replace my Pentair JetVac JV105 pool sweep as it is five years old and pretty well worn out. My pool is in ground, about 35K...

Long story short my wife dosent care about pool cemicals and think im indane for trying to figure this out on my own and reading up on pool care. Im...

Learning all the tips on maintaining my pool

I am re-posting my earlier attempt,because; when I submitted earlier, I was prompted that i had not signed in-but could not get the sight to open...

New to the pool scene here. My new to us home has a 16x30 in ground within a screen enclosure and solar heat. The pool is currently being...

First post here and let me say thank you for everyone with all the helpful posts. I'm so sick of going to my local pool store and giving them half my...

Glad to be here, and I have a simple issue that seems to be confusing. I had an inground pool built in 2007 and all was great. In 2014 I replaced the...

Serveral pools in my area have calcium flakes in our pool, it is like having snow in water. Hardness is high we all have salt pools we all have...

I have a pool built in the early 70's and the pump is a Master Pools. The old brass colored one. I can't find any info on it anywhere or a match for...

I've had difficulty getting my pool in the proper ph range. We tried to use the pool water from last year and the ph was so low, I gave up after...

I have a 35,000 gallon, in ground pool in Upstate New York and at least one of the return pipes is leaking. The pool loses water rapidly when I'm...

Has Ben resurfaced? Are you able to get people approved again? Thanks, Kim

I'm new to pool care and I've been learning a lot in the last few weeks about the various chemicals commonly used. I know about not adding chlorine &...

Having a pool put in the Pacific North West actually in the mountains where winters can get 3 to 4ft of snow and summers are in the 80s. Pool guy...

Hello. Newbie here. I have a 25,000 gallon, inground, vinyl rectangular pool, with 2 returns and 1 skimmer and 1 main drain. I use a solar cover...

Hi, new guy here ;). I am going to look at a home sat am, several hundred miles from here and it has an in ground pool. My realtor knows nothing...

Can someone tell me how to wire the multiplex board in an aqualink RS system. The multiplex board has four 485 red pins that are marked J1-J2-J3-J4....

Can someone please tell me how to wire the multiplex board in a jandy aqualink syatem. The multiplex board has four red pins labeled J1-J2-J3-J4. In...

I need to replace my Hayward salt cell. Does anyone have any positive/negative info on the generic SWG cell made by Compupool? I'm on my second...