Forum: --cleanup--

I am a new pool owner of a 15 year old pool (in ground with 2HP Hayward pump). I will try to summarize a difficult problem (at least for this pool...

I'm looking for a check valve cover that would fit the 'squarish' windowed check valve w/ 6 screws (not the round 8 screw windowed check valve) I've...

I bought a new Hayward Pool Vac XL. And adjusted everything it told me too. Called Hayward for help, Etc. Still had the same problem. It would...

So glad to find this forum. Our pool has had an algae problem recently. local pool store said it has a "chemical lock". Pool was fine until we went...

Is it true that the only way to reduce a cya level of 150 is to dump several feet of water from the pool and replace with fresh water? I have a 16...

Hi, Im new to the pool life. Just in the process of interviewing builders and getting designs. I'm looking for information and reading everything i...

I was looking at handling EcoSmarte products and was wondering if there were any new information on the product. We installed 3 of them back years...

I read posts back to 2007 on Ecosmarte has anyone seen anything recently?

Hey guys! I am new to this forum. We purchased a house. It has a 60′ long and 12′ wide pool. I want to light it somehow. But not very expensive....

Hello , new to TPF. New pool owner as well!

Sheesh, I've never had to do so many steps just to search. Back to Google...

We are finally able to afford a swimming pool. There are so many different options and so many different prices out there. We are in California which...

We have been to every pool place in town, had the pool installer here, and had management from the pool manufacturer come to town, all to help us...

Hi, We are going to be resurfacing our pool soon and I have a couple of questions. I'll use the search function here to see if these questions...

Hi all. first time post. I can't seem to find where my suction side leak is coming from. I replaced the pump basket o-ring, and i tried spraying...

I'm troubleshooting my IC-40 that has gone dark. I want to make sure there are no issues with the power center before I replace the IC-40 itself. ...

Ok I live in the mountains of North Carolina and I have a 18 x48 intex pool metal frame. I am gonna leave it up for the winter since we don't get...

We have the pad level and the pool is on the way. We are installing a 38 x 16 Barcelona model, fiberglass Viking pool. There will be a 400,000 btu...

I have a Laars LT400 pool heater with a Jandy EZ Wireless remote. Does anyone know where I can find parts for the EZ wireless remote, such as the...

I have an Intex 16x48 pool. When we took it down this year, the all-around white band on the pool was sliced on one end. No idea how it happened....

Why is it recommended not to use Lithium to shock a pool. I use Tri-Chlor tabs in an inline feeder for a stabilizing affect, and then Lithium weekly...

New to this site, recently started process to build my own pool using BYOP for design engineering, etc. Pool to be 37K gal, free form, Large rock...

Hi to all, thanks for accepting me here, I'm new user in this forum hope I welcome

Thank for allowing me to join

Hi All, We bought our house 2 years ago with existing pool. And 1 thing I have learned: Never again am I going to spend my time cleaning the DE...

How can I fix a large (36 inch) horizontal tear in the corner of a in ground vinyl pool liner?

Hi! I'm trying to get advice on a pool heater for our pool in central florida. It is inside an enclosure and is a rectangular 30,000 gallon pool. ...

My local pool store is quoting me 400$ for season closing Is it a fair price?

Had a problem in my pool all last season. I would vacuum pool and few hours later I would see debris all over floor again collecting in little...

Hi, Im new here and have new pool with 1 hp 115v waterway pump and sand filter. The pump works great - for about 45 secons, then clicks and stops. In...