I have a new-to-me 11000 gal in-ground pool with a Aqua Rite SWG system, my first experience with these devices. Now that the weather is cold, I...
Since this last May when we had all the rain in DFW, our vinyl loner has been pulling away from the walls and bottom of the pool. My husband is...
Please activate account. New user with 15000 pool. Easy touch Pentair. VF Intelliflow and Pentair 400 Heater. My heater keeps restarting....
Hello, New user to pool and this forum. The pool and equipment has been well taken care of. I have the following Pentair Easy Touch -4 Heater...
Hello all!!! My name is Chris, just bought a home w/ an in-ground pool/spa about 1.5 months ago. As a kid we had a pool at my mom's house (she...
We had Sicis brand glass tile installed in a pool remodel. Glass mosaic was approved for pools. Installer did dark grey bond coat (I don't know what...
I Have a CLB6L Club series spa , it holds 300 gallons of water. This is a new spa that I have only had for 3 months. I have had to empty 3 times ...
How should the valves be set for normal daily duties? And to Backwash? this is on a 25,000-30,000 gallon pool with 1 pump & 1 booster pump, DE...
It's Josh in Phoenix here. I don't have a pool but all of my customers do. This looks like a good place to discuss water chemistry and get some...
My pool and spa are on separate pumps and lines. My heater for the spa is busted. I would like to feed the spa line into the pools heater, but I do...
Glad to be a new member to this forum. Being new comes with limited ability to use the full site, so this question probably has been asked before. ...
I have low total alk and high pH in my 300 gallon Sundance spa. Instructions elsewhere on this website say start with adjusting pH to 7.4 with...
I want to learn more about my Above ground pool Thanks Mike L
Hi I`m new to the forum and hoping I can get the info needed to install my pool, Does anyone have installation instructions for a 16x24 gibralter...
I am looking for a SWCG for a 8000 gallon pool. Most that I see are for much larger pools. Any recommendations? Thanks,
I had the subject board go bad and was not willing to pay $600+ to replace the board. I replaced the 4 relays on the board and the relay driver IC ...
Does anyone know a reputable dealer that can install a pool enclosure over an 18x36 inground pool in the Knoxville area? I do not need one that...
Guys, Trying to understand some basics about RMF (Defender, Nemato) vs. sand filtration for commercial pools. Obviously for the larger volume...
I need to re-plaster a gunite inground poos and put in new colored LED Lights from scatch plus new skimmers. Any advice?
Location - Tucson, AZ Pool - In Ground, 25K Gallon, Built 1980, Currently being plastered redecked
My pool was installed and completed October 2015. The filter makes this hissing noise especially when the filter is on high.. I've been told that its...
Hello all..I had a renovation done starting 1+ yr ago. That was a disaster and had to be redone. Redo was mainly saw out footings under coping,expose...
What do others do when they go on vacation for a week or more to keep their FC up throughout the week? Everyone says don't use the hockey pucks. Any...
Hi All I have an Intex ultra frame 26x52 pool. I have had for the last two seasons an Intex ultra 18x48 pool. I'm glad to be part of this forum...
I have several trees and plants in my backyard that are always dropping leaves into the pool. Getting tired of having to constantly skim with the...
I currently participate on another pool owners site. I would like to be able to read through the various threads n this site.
Ben, Please see a portion of the above cited article. **************** Falk pointed Lowry to a chapter about the equilibria of isocyanurates....
This is my first post as required by site admin.
Hi folks, happy to join, and will be researching robotic cleaners. Thanks to everyone for their years of service. Kyosanim
I am a new pool owner of a 15 year old pool (in ground with 2HP Hayward pump). I will try to summarize a difficult problem (at least for this pool...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules