Hello! I have an above ground pool, 24' across and approximately 4.5' deep. I have a SwimPro SW256T high rate sand filter, and I don't recall the...
We purchased a home 3 years ago with what the previous owner said was a 35,000 gallon pool. It is gunnite with a salt generator, sand filter and a...
Good by pucks for I am becoming a BBB r. Thanks for all the info and I made my first $300.00 linked purchase to keep the lights on and will soon be...
Hello, Pump 1 1/2HP Filter: Pentair Tagelus TA60D (Not sure how old the sand is. Would guess around 4yrs) Pool 10 -12,000 gallons My back...
Hello! Thanks for allowing me to join the bulletin. I desperately plan to create a water fountain going from outside of my pool to the inside mainly...
I posted a question, per instructions in this thread list, a few hours ago and was hoping to get a response fairly soon. Is this typical for a...
I'm looking to put in a vinyl pool. What would you use? I live in Toronto Canada and the pool installers either use 1 1/2" rigid piping or 2"...
I have the Intex 12x36 pool and want to use my more powerful pump. Has anyone come across a 1 1/4 push on to 1 1/2 inch screw on adaptor? Basically...
I found the link to the "Super simple pool chemistry recipe for Intex type pools" however I have a 10'X30" Intex that holds just under 1100 gallons....
New, and have learned that these forums are very helpful with a wealth of knowledge. I'm a Do-it-yourself guy, but somewhat new to pool...
Hello, Two bolts that secured one of the metal bands that run from side to side sheared and we had a catastrophic liner failure. I want to repair...
I have 16x48" intex pool with 1500gph pump. would like to upgrade to krystal clear sand pump 2800gph or 3000gph.would either of these be recommended?
Opening my pool using the Bleach Borax Baking Soda Method poured 2 gal bleach in last night and 1/2 box borax currently no chlorine reading and PH is...
Opening Intex 18'x 48" pool using Bleach Borax Baking Soda method added 2 gal bleach last night as well as 1/2 box Borax as seen in a previous thread...
Bought a house with a 40 year old inground gunnite pool - 22x45. 12' at its deepest end and 4 ' at its shallow end. For the last 15 years it was...
I will be getting one of the recommended test kits. Up to now I have gotten by with guess-strips. I have had my pool for 7 years and have had minimal...
1st post... Test 1,2,3
1st time cleaning pool, why do I have this blue ring around my suction hole? See the bottom hole:...
I am a newbie and for the first time, my wife and I decided to open up the pool (b/c we just changed the liner and the cover was already removed). ...
Sorry if this is double posted. I don't think it went thru. We are buying a Bank owned house, and the 15 x 30 pool hasn't been used for about 3...
Moved in 2 months ago to a beauty of a pool with a problem (I learned here) previous tenants horrible regimen was shock and tabs. I inherited a...
Hello All,Glad To Be Apart Of Your Forums And Community!!!
How Do I Open My Pool With The BBB Method?
So we are the crazy people who thought this pool would be a good idea. Our backyard had a slope. It also had trees that we decided to cut down. We...
I NEED HELP: 20,000 GAL. pool pebblebrite, PH 6.2 or lower, TA 125, CA 125, TDS 1980, HARDNESS 1000, tried adjusting PH with PH UP, of course TA went...
Thanks in advance for all the future help and all educational material on this site. I am a new pool owner or at least almost new because I am...
Hello to all from Coloraodo. This is my second post in the forum and I am still locked down from searching and forums. Please grant me access. ...
Okay, I have 3 good bids for pool. They all have good reviews, etc. For a family of 3, including a 3 year old. I want to get the best for her...and...
We had Sicis brand glass tile installed in a pool remodel. Glass mosaic was approved for pools. Installer did dark grey bond coat (I don't know what...
Due to a recent storm in the area, a felled tree knocked over a potted plant which crashed into the PVC piping for the filter and pump. While...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules